Here we will detail some frequently asked questions and answers for the T-ReX MK2 Balloon Stuffing tool - ReXploder remote controlled exploding balloon system and the Super Size Balloon Lites.
Scroll down to see more questions if the one you have in mind is not listed first and if you have a question that is not covered, you can email us at trexstuffer@gmail.com

Q: How long does shipping take and where do you ship to?
A: Shipping is by Express International with tracking and takes usually between 7-10 business days. We ship to every Country we are legally allowed to do business with. Not Iran - Russia or North Korea for example.

Q: Are fees and taxes included in the price?
A: As we do not know what the fees and taxes are in your Country, they are not included in the purchase price, these are paid locally depending on the charges in each Country.

Q: Do we sell the balloons that are used in the videos?
A: No, these are best purchased locally. We strongly recommend Sempertex Balloons or sometimes Qualatex, but balloon choice is completely up to you.

Q: What size balloons do I need to use the T-ReX MK2 Balloon Stuffing Tool?
A: You must use 18” balloons or 36” balloons or larger to stuff into, you cannot use 16” balloons as the neck does not stretch wide enough. We use 5” balloons to put inside, inflated to approx 4 inches.

Q: What do I receive if I purchase a T-ReX MK2 ?
A: Inside the box are the following contents when you purchase a T-ReX MK2. The Shiny Black plastic Stuffing tube - ( the tube that the balloons pass through ) 2 Black legs that attach to the underside of the tube. 6 Super Strong Black O Rings - 2 you need plus 4 spares. A Clear 1 Metre long flexible air pipe - ( to attach to an air inflator, which is not included ) 1 Fun black carry bag - all contents fit inside this carry bag for portability. 1 Sample bag of Jumbo Kwik Clips - much easier than tying the larger balloons. ( Please Note: the air inflator is not included - you may also need strong clamps to secure the T-ReX to a table or bench - see our videos for more information )
Q: The Air Pipe does not fit my air inflator
A: We understand that there are different makes of electric air inflators on the market, when we designed the T-ReX MK2 we designed it to fit most of these, but some air inflators have smaller nozzles or different cone shaped nozzles and as a result the clear air pipe may not fit or stay in place. We have 2 suggestions if this is the case. 1. You can purchase clear pipe in different sizes from your local hardware store, a narrower opening / different size clear pipe may solve your problem. 2. You may need to temporarily tape the clear pipe to the nozzle of the air inflator to keep it in place, use a gaffa or cloth tape as this tape is strong, you can remove this tape if you need to use your air machine for other things. Be careful not to tape over any vents of the air machine as these vents are needed to prevent the air machine from over heating. See our instructional videos for more information.
Q: Do I need to use an air inflator with the T-ReX MK2 ?
A: Yes, you must use an electric air inflator that produces constant and steady air flow, that is how the big balloon on the end of the T-ReX MK2 inflators as you pass the smaller 5" balloons through the tube. You cannot use an air compressor or any product that connects to an air compressor, you cannot use a Conwin® Digital sizer of any kind, it must be an air inflator or air machine that has a blower inside to blow constant air. Something like this (click link )

Q: What size O Rings do I need to buy?
A: The 2 Rubber O Rings that secure the T-ReX MK2 Stuffing Tube to the legs are 100mm, x 4mm  ( about 4 inches ) in size. You can purchase replacement O Rings at most plumbing supply stores, even some hardware stores stock them. We do not supply replacement O Rings but we do include 6 O Rings when you purchase a new T-ReX MK2 Balloon Stuffer. 2 that are required and 4 spares.  As a Tip you can use strong Elastic bands.
Q:What brand of balloons do we recommend ?
A: We have used most brands of balloons with the T-ReX MK2, as long as the balloons are from a reputible latex balloon manufacturer they will all work. What brand you use is your own personal preference. We find the Sempertex / Decortex /   Betallatex 3ft balloons are much easier to use than Qualatex.
Q: What is the T-ReX MK2 Made of?
A: The new T-ReX MK2 is made of strong black Poly Ethalene plastic, it is strong and rigid. The Black Tube of the T-ReX MK2 is more flexible than the legs  but this is done deliberately as the stuffing part of this product must be flexible to move as you stretch the 18" or 3ft balloons over the end. It also must take the rough and tumble of being taken on a job site, put in the back of your van etc.
Q: What size balloons work with the T-ReX MK2 Balloon Stuffing Tool ?
A: You can use 18" stuffing balloons - 3ft latex balloons - 4ft latex balloons - 5ft and 6ft latex balloons. They will all stretch over the end of the T-ReX MK2
        When stuffing inside larger balloons you can use 5" round balloons, 5" hearts - 160 - 260 & 640's. There is a different technique for stuffing different
        size and shaped balloons inside using the T-ReX MK2. Most of our videos cover this.
Q: Can I stuff helium filled 5" balloons inside using the T-ReX MK2?
A: Yes you can. You helium fill the 5" balloons and then put them in a trash bag ( garbage bag ). Then you stuff them inside just as you would the air filled
        5" balloons. Once you are finished you have a choice to helium filled the 3ft or 18" balloon or air fill it depending upon your application.
Q: Do I have to clamp the T-ReX MK2 when using it?
 A: You must secure the T-ReX MK2 Balloon stuffing tool to a table or benchtop when in use, you can secure it permanently by watching our video on
        securing your T-ReX to a bench or table or you can buy some clamps from a local hardware store and clamp the legs in place.
Q: How much is a T-ReX MK2 Balloon Stuffing Tool?
 A: This will depend on which Country you are in and whether there is a distributor in that Country, we do ship worldwide, so even if there is not a
        distributor in your Country we will ship anywhere in the world within around a week, we want everyone to have the ability to buy it.
Q: How do I become a Distributor?
 A: You can email us at trexstuffer@gmail.com and we will happily send you through the Distributor pricing and Distributor requirements.
Q: What comes included with the T-ReX MK2 Balloon Stuffing Tool?
 A:You receive the following items when you purchase a T-ReX MK2 Balloon Stuffing tool:
        1 Black Stuffing Tube : 2 Black legs : 6 Black rubber o rings : 1 air hose to connect to an air inflator: A sample pack of jumbo clips :
        1 Black carry bag.    The kit does not include an air machine - these are sold separately in some Countries.  No clamps are included.